Skip to content

logo

  • TRY OrCAD X
  • TRAINING
  • XAI
  • FREE TUTORIAL
  • MATRIX
  • SIGRITY SI PI
  • CONTACT

Session 15: Course Completed 17.4

November 12, 2019 training admin
Posted by training admin on November 12, 2019August 21, 2026
OrCAD PCB Editor 17.4-2019 Session 15: Course Completed 17.4

You have successfully completed the OrCAD PCB Editor 17.4 Training Course.

Previous Quiz
Back to Course

Course Nav

Course Home Expand All
Session 1: Introduction 17.4
Session 2: Padstacks 17.4
2 Topics | 1 Quiz
Lab 2-1: Creating Padstacks for a Through-Hole Pin Device 17.4
Lab 2-2: Creating Padstacks for Surface-Mounted Devices 17.4
Lab 2 Padstacks Quiz 17.4
Session 3: PCB Editor Essentials 17.4
Session 4: Footprints (Package Symbols) 17.4
3 Topics | 1 Quiz
Lab 4-1: Creating HBGA-780 using Package Symbol Wizard 17.4
Lab 4-2: Creating a Through Hole Package Symbol 17.4
Lab 4-3: Creating an SOIC16 Package Symbol 17.4
Session 4: Footprints Quiz 17.4
Session 5: Mechanical Symbols and Master Boards 17.4
2 Topics | 1 Quiz
Lab 5-1: Creating a Board Mechanical Symbol 17.4
Lab 5-2: Creating a Master Design File (.brd) 17.4
Session 5: Mechanical Symbols Quiz 17.4
Session 6: Initial Board Creation 17.4
1 Topic | 1 Quiz
Lab 6-1: Initial Board Creation 17.4
Session 6: Initial Board Creation Quiz 17.4
Session 7: Setting Physical and Spacing Rules (Constraints) 17.4
6 Topics | 1 Quiz
Lab 7-1: Setting Physical Rules 17.4
Lab 7-2: Setting Spacing Rules 17.4
Lab 7-3: Setting Class-Class Rules 17.4
Lab 7-1a: Setting Physical Rules using Capture CM 17.4
Lab 7-2a: Setting Spacing Rules using Capture CM 17.4
Lab 7-3a: Setting Class-Class Rules using Capture CM 17.4
Session 7: Physical and Spacing Rules Quiz 17.4
Session 8: Properties and Manufacturing Checks 17.4
2 Topics | 1 Quiz
Lab 8-1: Working with Properties 17.4
Lab 8-2: Manufacturing Checks 17.4
Session 8: Properties and Manufacturing Checks Quiz 17.4
Session 9: Component Placement 17.4
5 Topics | 1 Quiz
Lab 9-1: Component Placement 17.4
Lab 9-2: Assigning Preplaced Packages 17.4
Lab 9-3: Manual Placement 17.4
Lab 9-4: Using Quickplace 17.4
Lab 9-5: Removing Components from the Board 17.4
Session 9: Component Placement Quiz 17.4
Session 10: Other Placement Topics 17.4
4 Topics | 1 Quiz
Lab 10-1: Displaying Ratsnests 17.4
Lab 10-2: Swapping Components, Pins, and Functions 17.4
Lab 10-3: Placing Alternate Symbols 17.4
Lab 10-4: Using OrCAD Capture or CIS for Placement 17.4
Session 10: Other Placement Topics Quiz 17.4
Session 11: Shapes 17.4
3 Topics | 1 Quiz
Lab 11-1: Copper Areas 17.4
Lab 11-2: Other Shape Functions 17.4
Lab 11-3: Shape Edit Application Mode 17.4
Session 11: Shapes Quiz 17.4
Session 12: Routing 17.4
8 Topics | 1 Quiz
Lab 12-1: Defining Etch Grids 17.4
Lab 12-2: Adding and Deleting Connect Lines and Vias 17.4
Lab 12-3: Routing using Working Layer (Alternative method) 17.4
Lab 12-4: Autorouting 17.4
Lab 12-5: Checking for Unconnected Pins 17.4
Lab 12-6: Improving Routed Connections 17.4
Lab 12-7: Replacing Etch and Using the Cut Option 17.4
Lab 12-8: Running Gloss 17.4
Session 12: Routing Quiz 17.4
Session 13: Preparing for Manufacturing 17.4
6 Topics | 1 Quiz
Lab 13-1: Using the 3D board view 17.4
Lab 13-2: Renaming Components 17.4
Lab 13-3: Design Sync with OrCAD Capture or CIS 17.4
Lab 13-4: Creating Silkscreens 17.4
Lab 13-5: Creating Reports 17.4
Lab 13-6: Drafting Utilities 17.4
Session 13: Preparing for Manufacturing Quiz 17.4
Session 14: Manufacturing Output Data 17.4
6 Topics | 1 Quiz
Lab 14-1: Creating Artwork Files 17.4
Lab 14-2: Viewing Gerber Files 17.4
Lab 14-3: Creating a Drill Legend 17.4
Lab 14-4: Creating Fab and Assembly Drawings 17.4
Lab 14-5: Creating an NCDRILL File 17.4
Lab 14-6: Exporting a PDF of the Board 17.4
Session 14: Manufacturing Output Data Quiz 17.4
Session 15: Course Completed 17.4
Return to OrCAD PCB Editor 17.4-2019

logo

  • Contact
  • Matrix
  • Privacy Policy
  • Student
  • Tutorial
  • User Guides
  • Videos
  • Bureaus
  • Training