Skip to content

logo

  • OrCAD X
  • TRAINING
  • FREE TUTORIAL
  • MATRIX
  • SIGRITY SI PI
  • CONTACT

Session 14: Course Completed

July 5, 2019 training admin
Posted by training admin on July 5, 2019July 5, 2019
OrCAD PCB Editor Advanced 17.2-2016 Session 14: Course Completed

Please complete this form to receive your course certificate:

 

    Your Name (required)

    Your Email (required)

    Company Name (required)

    Previous Quiz
    Back to Course

    Course Nav

    Course Home Expand All
    Introduction
    Session 1: Scribble Routing
    1 Topic
    Lab 1-1: Scribble Routing
    Session 2: Group / Bus Routing
    1 Topic
    Lab 2-1: Group / Bus Routing
    Session 3: Contour Routing
    1 Topic
    Lab 3-1: Contour Routing
    Session 4: Via Arrays
    1 Topic | 1 Quiz
    Lab 4-1: Via Arrays
    Session 4 Via Arrays Quiz
    Session 5: Electrical Constraints
    8 Topics | 1 Quiz
    Lab 5-1: Net Scheduling
    Lab 5-2: Single Ended Impedance
    Lab 5-3: Min / Max Propagation Delay
    Lab 5-4: Relative Propagation Delay
    Lab 5-5: Pin Delay and Z Axis Delay
    Lab 5-6: Differential Pair, Static Phase
    Lab 5-7: Differential Pair, Dynamic Phase
    Lab 5-8: Total Etch Length
    Session 5 Electrical Constraints Quiz
    Session 6: Autorouting
    1 Topic
    Lab 6-1: Autorouting
    Session 7: Place Replicate
    1 Topic | 1 Quiz
    Lab 7-1: Place Replicate
    Session 7 Place Replicate Quiz
    Session 8: Fillet and Taper Traces
    1 Topic
    Lab 8-1: Fillet and Taper Traces
    Session 9: Constraint Regions
    1 Topic | 1 Quiz
    Lab 9-1: Constraint Regions
    Session 9 Constraint Regions Quiz
    Session 10: Rigid Flexi Designs
    4 Topics | 1 Quiz
    Lab 10-1: Defining the stackup (Cross Section)
    Lab 10-2: Creating the PCB Zones
    Lab 10-3: Placing and Routing on a Flexi
    Lab 10-4: Bending Flexis and Manufacturng Data
    Session 10 Rigid Flexi Quiz
    Session 11: Backdrilling
    6 Topics | 1 Quiz
    Lab 11-1: Padstack Editor Backdrill data
    Lab 11-2: Using Padstack Editor Backdrill data in a board
    Lab 11-3: Advanced Manufacturing Stub Length Checks and Analysis
    Lab 11.4: Backdrill Data Visibility (Pins/Vias)
    Lab 11-5: DRC and Shape Voiding
    Lab 11.6: Backdrill Manufacturing Data
    Session 11 Backdrilling Quiz
    Session 12: Analysis Workflows
    2 Topics | 1 Quiz
    Lab 12-1: Impedance Vision Workflow
    Lab 12-2: Coupling Vision Workflow
    Session 12 Analysis Workflow Quiz
    Session13: Vision Manager and Void Checking
    4 Topics | 1 Quiz
    Lab 13-1: Placement Vision
    Lab 13-2: Route Vision
    Lab 13-3: Segment over Voids
    Lab 13-4: Spread Between Voids
    Session 13 Vision Manager and Void Checking Quiz
    Session 14: Course Completed
    Return to OrCAD PCB Editor Advanced 17.2-2016

    logo

    • Contact
    • Matrix
    • Privacy Policy
    • Student
    • Tutorial
    • User Guides
    • Videos
    • Bureaus
    • Training