Skip to content

logo

  • TRY OrCAD X
  • TRAINING
  • XAI
  • FREE TUTORIAL
  • MATRIX
  • SIGRITY SI PI
  • CONTACT

Session 13: Course Completed 17.4

November 12, 2019 training admin
Posted by training admin on November 12, 2019August 21, 2026
OrCAD PCB Editor Advanced 17.4-2019 Session 13: Course Completed 17.4

You have successfully completed the OrCAD PCB Editor Advanced 17.4 Training Course.

Previous Quiz
Back to Course

Course Nav

Course Home Expand All
Introduction 17.4
Session 1: Scribble Routing 17.4
1 Topic
Lab 1-1: Scribble Routing 17.4
Session 2: Group / Bus Routing 17.4
1 Topic
Lab 2-1: Group / Bus Routing 17.4
Session 3: Contour Routing 17.4
1 Topic
Lab 3-1: Contour Routing 17.4
Session 4: Via Arrays 17.4
1 Topic | 1 Quiz
Lab 4-1: Via Arrays 17.4
Session 4 Via Arrays Quiz 17.4
Session 5: Electrical Constraints 17.4
8 Topics | 1 Quiz
Lab 5-1: Net Scheduling 17.4
Lab 5-2: Single Ended Impedance 17.4
Lab 5-3: Min / Max Propagation Delay 17.4
Lab 5-4: Relative Propagation Delay 17.4
Lab 5-5: Pin Delay and Z Axis Delay 17.4
Lab 5-6: Differential Pair, Static Phase 17.4
Lab 5-7: Differential Pair, Dynamic Phase 17.4
Lab 5-8: Total Etch Length 17.4
Session 5 Electrical Constraints Quiz 17.4
Session 6: Place Replicate 17.4
1 Topic | 1 Quiz
Lab 6-1: Place Replicate 17.4
Session 6 Place Replicate Quiz 17.4
Session 7: Fillet and Taper Traces 17.4
1 Topic
Lab 7-1: Fillet and Taper Traces 17.4
Session 8: Constraint Regions 17.4
1 Topic | 1 Quiz
Lab 8-1: Constraint Regions 17.4
Session 8 Constraint Regions Quiz 17.4
Session 9: Rigid Flexi Designs 17.4
4 Topics | 1 Quiz
Lab 9-1: Defining the stackup (Cross Section) 17.4
Lab 9-2: Creating the PCB Zones 17.4
Lab 9-3: Placing and Routing on a Flexi 17.4
Lab 9-4: Bending Flexis and Manufacturng Data 17.4
Session 9 Rigid Flexi Quiz 17.4
Session 10: Backdrilling 17.4
6 Topics | 1 Quiz
Lab 10-1: Padstack Editor Backdrill data 17.4
Lab 10-2: Using Padstack Editor Backdrill data in a board 17.4
Lab 10-3: Advanced Manufacturing Stub Length Checks and Analysis 17.4
Lab 10.4: Backdrill Data Visibility (Pins/Vias) 17.4
Lab 10-5: DRC and Shape Voiding 17.4
Lab 10.6: Backdrill Manufacturing Data 17.4
Session 10 Backdrilling Quiz 17.4
Session 11: Analysis Workflows 17.4
2 Topics | 1 Quiz
Lab 11-1: Impedance Vision Workflow 17.4
Lab 11-2: Coupling Vision Workflow 17.4
Session 11 Analysis Workflow Quiz 17.4
Session12: Vision Manager and Void Checking 17.4
4 Topics | 1 Quiz
Lab 12-1: Placement Vision 17.4
Lab 12-2: Route Vision 17.4
Lab 12-3: Segment over Voids 17.4
Lab 12-4: Spread Between Voids 17.4
Session 12 Vision Manager and Void Checking Quiz 17.4
Session 13: Course Completed 17.4
Return to OrCAD PCB Editor Advanced 17.4-2019

logo

  • Contact
  • Matrix
  • Privacy Policy
  • Student
  • Tutorial
  • User Guides
  • Videos
  • Bureaus
  • Training